Instalirao sam Mandrake 10 Official Power Pack 2.6.3-7kernel
Kad je trebalo da instaliram TV karticu (conexantov chip modul je cx8800) instalacija cx88-0.0.4.tar.gz paketa je prosla uredu
$make
$make install
(probao sam i sa menjanjem redova u makefile-u:
KDIR := /lib/modules/2.6.3-7mdk/build
DEST := /lib/modules/2.6.3-7mdk/$(MDIR)
medjutim po pokretanju modula:
$modprobe cx8800
$modprobe tda9887 (potreban tuneru)
dobio sam /dev/v4l/video0, ali ne i radio i vbi koje sam imao u MDK 10 Comunity Download 2.6.3-4 kernel i samim tim nemam ni zvuk vec samo sliku, a TV bez zvuka mi bas i nije interesantno da gledam
/etc/modules.conf izgleda ovako:
above snd-cmipci snd-pcm-oss
alias sound-slot-0 snd-cmipci
#i2c
alias char-major-81 vtx
alias char-major-89 i2c-dev
options i2c-core i2c_debug=1
options i2c-algo-bit bit_test=1
# cx8800
alias char-major-81 videodev
alias char-major-81-0 cx8800
options cx8800 card=5 radio=1 gbuffers=8
options tuner type=44
naredba dmesg iscita sledece:
cx2388x v4l2 driver version 0.0.1 loaded
PCI: Found IRQ 11 for device 0000:00:0d.0
PCI: Sharing IRQ 11 with 0000:00:11.1
PCI: Sharing IRQ 11 with 0000:01:00.0
cx8800[0]: found at 0000:00:0d.0, rev: 5, irq: 11, latency: 32, mmio: 0xed000000
cx8800[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected]
tuner: chip found @ 0xc0
tuner: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
cx8800[0]: i2c attach [client=Philips PAL/SECAM multi (FM1216ME MK3)]
tda9887: chip found @ 0x86
tuner: type already set (38)
cx8800[0]: i2c attach [client=tda9887]
tuner: type already set (38)
cx8800[0]: registered device video0 [v4l2]
cx8800[0]: set_audio_standard_BTSC() [TODO]
pokrenuo sam i
$depmod -a
ali nista se nije promenilo, rekompajlirao sam kernel pre i posle instalacije drajvera i opet nista!!!
Ako neko ima volje i znanja da pomogne biti cu sracan